Maier Sponge & Dressing Forceps – Curved, Serrated, 260 mm (10 1/4″), With ratchet

The Maier Sponge & Dressing Forceps – Curved, Serrated, 260 mm (10 1/4″), With ratchet is a reusable sponge-holding and dressing forceps configured with finely serrated jaws that grip folded gauze and sponges without tearing, a curved working profile, and a locking ratchet. It measures 260 mm (10 1/4″). The Maier pattern is one of the most widely recognised sponge-holding (sponge-and-dressing) forceps designs, valued for secure swab retention during preparation and swabbing. Each unit is precision-manufactured by Rahmet Group from German stainless steel and finished with a glare-reducing satin surface.

In use, a curved working profile for atraumatic access into recesses and angled approaches pairs with a ratchet (box-lock) catch that holds a mounted swab under steady pressure, freeing the surgeon’s attention for the task at hand. The serrated jaw pattern is designed to grip folded gauze and sponges securely while remaining gentle on the dressing itself, and the 260 mm length places this reference in the long range, well matched to deeper cavities where additional reach is required. The satin finish keeps reflections low under bright theatre lighting, and the all-stainless construction tolerates repeated cleaning and steam sterilisation without pitting or loss of spring.

Clinically, sponge and dressing forceps of this type are everyday instruments across general, gynaecological, ENT and minor-procedure settings. They mount swabs for skin antisepsis, hold and pass gauze, blot and clear the field, and assist with simple blunt manipulation. When selecting between references, theatres typically match jaw length to field depth, choose a curved jaw for angled or recessed access, and pick a ratchet when a sponge must be held under sustained pressure.

For procurement teams, distributors and OEM buyers, this reference is stocked for volume supply and is available for private-label and OEM manufacturing through Rahmet Group. Standardising on a consistent, well-finished sponge-and-dressing forceps simplifies set assembly, reprocessing and instrument-tracking across a department.

Key Features

• Serrated jaws for secure, atraumatic retention of sponges and gauze
• Curved jaw profile for improved reach around tissue and into recesses
• Locking ratchet (box-lock) for a sustained, fatigue-free grip on the mounted swab
• 260 mm (10 1/4″) working length suited to deeper cavities where additional reach is required
• German stainless steel construction for corrosion resistance and repeated reprocessing
• Satin (non-reflective) finish to reduce glare under operating lights
• Fully autoclavable for routine steam sterilisation between cases

Clinical Applications

• Holding, mounting and passing surgical sponges and gauze
• Applying antiseptic solution during skin preparation
• Swabbing, blotting and clearing fluids within the operative field
• Handling and positioning wound dressings
• Atraumatic access around tissue planes and into angled or recessed sites
• Deep-cavity swabbing in abdominal, pelvic or thoracic procedures requiring extended reach

Specifications

Care & Maintenance

• Rinse promptly after use and do not allow blood, saline or debris to dry on the instrument.
• Clean with a neutral-pH enzymatic detergent; ultrasonic cleaning is recommended for the hinged joint.
• Open the joint fully and brush the serrations/teeth to clear trapped fibres and tissue.
• Lubricate the box joint with surgical instrument milk before sterilisation.
• Steam-sterilise (autoclave) per your facility’s validated cycle and dry thoroughly.
• Inspect jaw alignment, ratchet function and finish before each use; withdraw any damaged instrument from service.

Frequently Asked Questions

What is the Maier sponge & dressing forceps used for?
It is a reusable sponge-holding and dressing forceps used for holding and passing sponges, applying antiseptic during skin prep, and swabbing within the operative field. The 260 mm (10 1/4″) length suits deeper cavities where additional reach is required.

Is this instrument autoclavable?
Yes. It is manufactured from German stainless steel and is fully autoclavable; sterilise it using your facility’s validated steam cycle and allow it to dry completely.

What does the ratchet do during use?
The ratchet (box-lock) catch lets you lock the jaws onto a mounted swab so it stays put under steady pressure, which is useful when the same sponge is held for a sustained period.

Should I choose the straight or curved jaw?
This unit has a curved jaw. Curved jaws help you reach around tissue and into recesses while keeping the tip in view. Many theatres stock both profiles for flexibility.

Do you supply this in bulk or for OEM / private label?
Yes. Rahmet Group supplies this forceps to hospitals and distributors in volume, and offers OEM and private-label manufacturing. Indicative wholesale pricing for this reference is around US$57.50 per unit; request a quotation for tiered volume rates.

Related Categories & Resources

• General Surgery Instruments
• Sponge & Dressing Forceps
• Surgical Instrument Sets
• Bulk Orders
• Instrument Care & Maintenance guide

Manufactured and supplied by Rahmet Group. Medically reviewed for clinical accuracy. SKU BF059R.