Surgical Measuring Instrument (Straight)

Product Overview

This straight surgical measuring instrument is used for measurement during surgical procedures. It is supplied in two straight configurations that differ only in overall length. The two lengths are closely spaced, so the family allows a department to choose between two near-equivalent working lengths of the same straight instrument.

A straight measuring instrument of this type is referenced along the dimension to be measured and read against its scale. With only two closely spaced lengths offered, the choice between them reflects the exact working length preferred at the field rather than a difference in function.

Design and Configuration

Both members are straight and differ only in overall length: 160 mm (6 1/4″) and 165 mm (6 1/2″). The straight form is common to both, leaving length as the single distinguishing attribute. The 5 mm difference between the two configurations is small; where exact tip geometry matters for selection, the individual article numbers (OG140R and OG141R) should be confirmed against the manufacturer reference before ordering.

This product is offered as a family of related configurations. The available configurations are:

• Measuring Instrument, Straight, 160 mm (6 1/4″) (article OG140R): 160.00 mm (6 1/4″).
• Measuring Instrument, Straight, 165 mm (6 1/2″) (article OG141R): 165.00 mm (6 1/2″).

All configurations share the same instrument type and pattern identity and are listed together as a single family so the correct option can be selected without changing the instrument design. Refer to the individual variation for the exact specification when requesting a quote.

Selection Guidance

Selection within the family is straightforward because every member shares the same instrument type; only the distinguishing attribute changes between configurations. A department can therefore standardize on a single design and stock or order the specific option that matches the task at hand, rather than treating each option as a different instrument.

Technical Specifications

The following specifications are taken directly from the source catalog. Fields the catalog does not state are omitted rather than estimated:

• Instrument Type: Surgical Measuring Instrument.
• Form: Straight.
• Available Lengths: 160 mm (6 1/4″), 165 mm (6 1/2″).
• Configurations: 2.
• Family ID: FAM-000004.

In terms of specification scope, the source catalog states the following for this item: instrument type, form, available lengths, configurations. It does not state material, surface finish, so those are not listed above; we present only the attributes the catalog publishes and confirm any further detail on request. Keeping the record limited to published attributes preserves traceability between the storefront entry and the original catalog.

Applications

The following uses follow directly from the instrument’s type and the catalog specification:

• Measurement during surgical procedures using a straight instrument.

Identification and Traceability

This product is identified by Aesculap article numbers OG140R, OG141R; the internal family identifier FAM-000004. Every record traces back to the catalog page on which the item appears, so the published article number remains the authoritative ordering reference.

Specification Scope and Material

Material and surface finish are not stated in the source catalog for this item and are therefore not listed; these details can be confirmed on request and are not estimated here.

Catalog Reference

For reference, this product is catalogued within the Instruments for Measuring section of the source surgical instrument catalog. The published article number is treated as the authoritative ordering reference, and the storefront presentation is kept brand-neutral and factual.

Ordering Information

This storefront operates as a business-to-business inquiry platform for hospitals, surgical centers, procurement teams, distributors and dealers. Native prices are not displayed. Because the product is offered in several configurations, the required configuration should be chosen first, after which a quote can be requested for that specific article number. A request-a-quote or send-inquiry action returns current pricing, lead time and availability, and our team responds with the details needed to complete an order.