Galabins Uterine Probe

## Product Overview

Galabins Uterine Probe is a uterine probe listed in the Probes range of the Aesculap Surgical Instrument Catalog, page 1394. The catalog identifies the instrument under the GALABINS pattern, which is the designation procurement teams and distributors use to identify this instrument family across suppliers. The source catalog is bilingual and prints the designation as Uterine Probe in English and Uterussonde in German, so either term can be used when matching this item against an existing inventory or tender list. This entry represents the complete catalogued family of 2 configurations rather than a single item, so the specifications below describe the full printed range. Each configuration carries its own catalog number and is quoted separately. The family is printed in the catalog under the range EO010R-EO012R. It is classified in the catalog under Surgical Instruments > Probes > Uterine Probe.

## Design Characteristics

The following characteristics are printed for every configuration in this listing: length 295 mm, diameter 3.6 mm, curved, bulb-headed tip, malleable, and length (imperial) 11 5/8″. Overall length is printed as 295 mm (11 5/8″ imperial). The printed working-end diameter is 3.6 mm. The working portion is printed as curved, which is the geometry the catalog specifies for this reference. The tip is printed as bulb-headed tip. The shaft is printed as malleable. The catalog prints these descriptors bilingually: curved (gebogen), malleable (biegbar), and bulb-headed tip (Knopfspitze).

## Configuration Options

The family is catalogued in 2 configurations. The source catalog does not print an attribute that distinguishes every configuration in this family, so each is identified by its printed catalog number. The printed specification for each is reproduced below exactly as it appears in the source, with no value inferred.

– **EO010R** — curved; malleable; bulb-headed tip; length 295 mm; diameter 3.6 mm
– **EO012R** — curved; malleable; bulb-headed tip; length 295 mm; diameter 3.6 mm

Each configuration above is a separately catalogued item and can be quoted individually or as a set. Where two configurations carry identical printed specifications, the source catalog distinguishes them by catalog number only.

## Technical Specifications

– **Instrument type:** Uterine Probe
– **Pattern:** GALABINS
– **Length:** 295 mm
– **Diameter:** 3.6 mm
– **Curvature:** curved
– **Tip:** bulb-headed tip
– **Shaft characteristic:** malleable
– **Length (imperial):** 11 5/8″
– **Catalog category:** Probes (BN)
– **Catalog numbers:** EO010R, EO012R
– **Configurations:** 2
– **Family ID:** FAM-000036
– **Source:** Aesculap Surgical Instrument Catalog, p. 1394

## Specification Coverage

The source catalog prints overall length, working-end diameter, curvature, shaft characteristic, and tip form for this listing. It does not print edge, size code, material, and working angle; these values are omitted here rather than estimated, and can be confirmed on inquiry. This listing reproduces only what the manufacturer’s catalog states. No material, certification, performance or clinical claim is added.

## Applications

The printed instrument designation identifies this item for uterine procedures. This statement rests solely on the designation printed in the source catalog. The catalog does not publish indications, clinical protocols or procedure lists, and none are implied here. Confirm suitability for any specific procedure with your clinical team and against the manufacturer’s current instructions for use.

## Ordering Information

Galabins Uterine Probe is supplied on a request-for-quote basis; the catalog publishes no price. Quote the catalog number for the configuration required. This family covers EO010R and EO012R. Refer to the individual configurations listed above for the exact printed specification of each. Send an inquiry to confirm current availability, packaging and lead time, or to request a formal quotation. Contact us for procurement documentation, including catalog references for tender submissions.

## Source and Traceability

All specifications above are reproduced from the Aesculap Surgical Instrument Catalog, page 1394, Probes section. Registry reference REG-000064; family FAM-000036. Values not printed in the source are omitted rather than estimated. For reference, the printed specification block for EO010R reads: · GALABINS · 11 5/8“, 295.00 mm · curved, gebogen · malleable, biegbar · bulb-headed tip, Knopfspitze · 3.60 mm