Double Ended Probe, Application Instrument

## Product Overview

Double Ended Probe, Application Instrument is a double ended probe, application instrument listed in the Probes range of the Aesculap Surgical Instrument Catalog, page 1397. The source catalog is bilingual and prints the designation as Double Ended Probe, Application Instrument in English and Doppelknopfsonde, Führungsgabel/Applikationsinstrument in German, so either term can be used when matching this item against an existing inventory or tender list. This entry represents the complete catalogued family of 2 configurations rather than a single item, so the specifications below describe the full printed range. Each configuration carries its own catalog number and is quoted separately. The family is printed in the catalog under the range OF266R-OF267R. It is classified in the catalog under Surgical Instruments > Probes > Double Ended Probe, Application Instrument.

## Design Characteristics

The following characteristics are printed for every configuration in this listing: diameter 3.3 mm and straight. The printed working-end diameter is 3.3 mm. The working portion is printed as straight, which is the geometry the catalog specifies for this reference. The catalog prints these descriptors bilingually: straight (gerade). Characteristics that differ across the family are set out under Configuration Options below.

## Configuration Options

The family is catalogued in 2 configurations. Configurations are distinguished by length. Printed length options are 140 mm and 180 mm. Any combination not listed below is not printed in the source catalog and is therefore not offered as a catalogued configuration.

– **OF266R** — straight; length 140 mm; diameter 3.3 mm
– **OF267R** — straight; length 180 mm; diameter 3.3 mm

Each configuration above is a separately catalogued item and can be quoted individually or as a set. Where two configurations carry identical printed specifications, the source catalog distinguishes them by catalog number only.

## Technical Specifications

– **Instrument type:** Double Ended Probe, Application Instrument
– **Diameter:** 3.3 mm
– **Curvature:** straight
– **Length options:** 140 mm and 180 mm
– **Catalog category:** Probes (BN)
– **Catalog numbers:** OF266R, OF267R
– **Configurations:** 2
– **Family ID:** FAM-000042
– **Source:** Aesculap Surgical Instrument Catalog, p. 1397

## Specification Coverage

The source catalog prints overall length, working-end diameter, and curvature for this listing. It does not print edge, size code, material, working angle, shaft characteristic, and tip form; these values are omitted here rather than estimated, and can be confirmed on inquiry. This listing reproduces only what the manufacturer’s catalog states. No material, certification, performance or clinical claim is added.

## Ordering Information

Double Ended Probe, Application Instrument is supplied on a request-for-quote basis; the catalog publishes no price. Quote the catalog number for the configuration required. This family covers OF266R and OF267R. Refer to the individual configurations listed above for the exact printed specification of each. Send an inquiry to confirm current availability, packaging and lead time, or to request a formal quotation. Contact us for procurement documentation, including catalog references for tender submissions.

## Source and Traceability

All specifications above are reproduced from the Aesculap Surgical Instrument Catalog, page 1397, Probes section. Registry reference REG-000070; family FAM-000042. Values not printed in the source are omitted rather than estimated. For reference, the printed specification block for OF266R reads: · JOBSON HORNE · straight, gerade · 3.30 mm