Monopolar Tissue Forceps

SKU: REG-001938 Category:

Monopolar Tissue Forceps is a monopolar tissue forceps catalogued in the HF Instruments section of the Aesculap Surgical Instrument Catalog. The catalog lists the instrument bilingually as Monopolar Tissue Forceps / Monopolare Gewebe-Pinzette. Every configuration in this listing is printed as straight, insulated, 1×2 teeth, and monopolar. The family comprises 3 catalogued configurations that differ by length. Printed lengths run from 200 mm to 300 mm. Specifications are reproduced exactly as printed in the source catalog. Submit an inquiry to request a quote or confirm availability.

Select Variation3 options

2-year warranty

Cubilia vestibulum interdum nisl lorem at interdum posuere libero iaculis.

Free Shipping

Cubilia vestibulum interdum nisl lorem at interdum posuere libero iaculis.

## Product Overview

Monopolar Tissue Forceps is a monopolar tissue forceps listed in the HF Instruments range of the Aesculap Surgical Instrument Catalog, page 1410. The source catalog is bilingual and prints the designation as Monopolar Tissue Forceps in English and Monopolare Gewebe-Pinzette in German, so either term can be used when matching this item against an existing inventory or tender list. This entry represents the complete catalogued family of 3 configurations rather than a single item, so the specifications below describe the full printed range. Each configuration carries its own catalog number and is quoted separately. The family is printed in the catalog under the range BD855R-BD857R. It is classified in the catalog under Surgical Instruments > HF Instruments > Monopolar Tissue Forceps.

## Design Characteristics

The following characteristics are printed for every configuration in this listing: straight, insulated, 1×2 teeth, and monopolar. The working portion is printed as straight, which is the geometry the catalog specifies for this reference. The instrument is printed as insulated, which governs how it may be paired with an electrosurgical generator. The catalog prints the energy mode as monopolar, which determines the generator connection and cable configuration required. The catalog prints these descriptors bilingually: straight (gerade) and insulated (isoliert). Characteristics that differ across the family are set out under Configuration Options below.

## Configuration Options

The family is catalogued in 3 configurations. Configurations are distinguished by length. Printed length options are 200 mm, 240 mm, and 300 mm. Any combination not listed below is not printed in the source catalog and is therefore not offered as a catalogued configuration.

– **BD855R** — straight; monopolar; insulated; 1×2 teeth; length 200 mm; diameter 1.4 mm
– **BD856R** — straight; monopolar; insulated; 1×2 teeth; length 240 mm; diameter 1.5 mm
– **BD857R** — straight; monopolar; insulated; 1×2 teeth; length 300 mm; diameter 1.5 mm

Each configuration above is a separately catalogued item and can be quoted individually or as a set. Where two configurations carry identical printed specifications, the source catalog distinguishes them by catalog number only.

## Technical Specifications

– **Instrument type:** Monopolar Tissue Forceps
– **Curvature:** straight
– **Insulation:** insulated
– **Teeth:** 1×2 teeth
– **Energy mode:** monopolar
– **Length options:** 200 mm, 240 mm, and 300 mm
– **Catalog category:** HF Instruments (GK)
– **Catalog numbers:** BD855R, BD856R, BD857R
– **Configurations:** 3
– **Family ID:** FAM-000065
– **Source:** Aesculap Surgical Instrument Catalog, p. 1410

## Specification Coverage

The source catalog prints overall length and curvature for this listing. It does not print working-end diameter, edge, size code, material, working angle, shaft characteristic, and tip form; these values are omitted here rather than estimated, and can be confirmed on inquiry. This listing reproduces only what the manufacturer’s catalog states. No material, certification, performance or clinical claim is added.

## Ordering Information

Monopolar Tissue Forceps is supplied on a request-for-quote basis; the catalog publishes no price. Quote the catalog number for the configuration required. This family covers BD855R, BD856R, and BD857R. Refer to the individual configurations listed above for the exact printed specification of each. Send an inquiry to confirm current availability, packaging and lead time, or to request a formal quotation. Contact us for procurement documentation, including catalog references for tender submissions.

## Source and Traceability

All specifications above are reproduced from the Aesculap Surgical Instrument Catalog, page 1410, HF Instruments section. Registry reference REG-000116; family FAM-000065. Values not printed in the source are omitted rather than estimated. For reference, the printed specification block for BD855R reads: · straight, gerade · monopolar · insulated, isoliert · 1 x 2 teeth, 1 x 2

Length

200 mm

,

240 mm

,

300 mm

Curvature

Straight

Insulation

insulated

Teeth

1×2 teeth

Energy Mode

monopolar

Related products