Bruns Bone Curette

## Product Overview

Bruns Bone Curette is a bone curette listed in the Spoons and Curettes range of the Aesculap Surgical Instrument Catalog, pages 1466–1473. The catalog identifies the instrument under the BRUNS pattern, which is the designation procurement teams and distributors use to identify this instrument family across suppliers. The source catalog is bilingual and prints the designation as Bone Curette in English and Scharfer Löffel in German, so either term can be used when matching this item against an existing inventory or tender list. This entry represents the complete catalogued family of 16 configurations rather than a single item, so the specifications below describe the full printed range. Each configuration carries its own catalog number and is quoted separately. The family is printed in the catalog under the range FK611R-FK617R and MB872R-MB880R. It is classified in the catalog under Surgical Instruments > Spoons and Curettes > Bone Curette.

## Design Characteristics

The following characteristics are printed for every configuration in this listing: straight, sharp, and rigid. The working portion is printed as straight, which is the geometry the catalog specifies for this reference. The catalog prints the working edge as sharp. The shaft is printed as rigid. The catalog prints these descriptors bilingually: straight (gerade), sharp (scharf), and rigid (starr). Characteristics that differ across the family are set out under Configuration Options below.

## Configuration Options

The family is catalogued in 16 configurations. Configurations are distinguished by length and diameter. Printed length options are 165 mm and 230 mm. Printed diameter options are 2 mm, 2.5 mm, 3 mm, 3.3 mm, 3.8 mm, 4 mm, 4.8 mm, 5 mm, 5.3 mm, 6 mm, 6.7 mm, 7.3 mm, 8 mm, 10 mm, and 12 mm. Any combination not listed below is not printed in the source catalog and is therefore not offered as a catalogued configuration.

– **FK611R** — straight; sharp; rigid; length 165 mm; diameter 3 mm
– **FK612R** — straight; sharp; rigid; size #00; length 165 mm; diameter 4 mm
– **FK613R** — straight; sharp; rigid; size #0; length 165 mm; diameter 5 mm
– **FK614R** — straight; sharp; rigid; size #1; length 165 mm; diameter 6 mm
– **FK615R** — straight; sharp; rigid; size #2; length 165 mm; diameter 8 mm
– **FK616R** — straight; sharp; rigid; size #3; length 165 mm; diameter 10 mm
– **FK617R** — straight; sharp; rigid; size #4; length 165 mm; diameter 12 mm
– **MB872R** — straight; sharp; rigid; length 230 mm; diameter 2 mm
– **MB873R** — straight; sharp; rigid; size #00; length 230 mm; diameter 2.5 mm
– **MB874R** — straight; sharp; rigid; size #0; length 230 mm; diameter 3.3 mm
– **MB875R** — straight; sharp; rigid; size #1; length 230 mm; diameter 3.8 mm
– **MB876R** — straight; sharp; rigid; size #2; length 230 mm; diameter 4.8 mm
– **MB877R** — straight; sharp; rigid; size #3; length 230 mm; diameter 5.3 mm
– **MB878R** — straight; sharp; rigid; size #4; length 230 mm; diameter 6 mm
– **MB879R** — straight; sharp; rigid; size #5; length 230 mm; diameter 6.7 mm
– **MB880R** — straight; sharp; rigid; size #6; length 230 mm; diameter 7.3 mm

Each configuration above is a separately catalogued item and can be quoted individually or as a set. Where two configurations carry identical printed specifications, the source catalog distinguishes them by catalog number only.

## Technical Specifications

– **Instrument type:** Bone Curette
– **Pattern:** BRUNS
– **Curvature:** straight
– **Edge:** sharp
– **Shaft characteristic:** rigid
– **Length options:** 165 mm and 230 mm
– **Diameter options:** 2 mm, 2.5 mm, 3 mm, 3.3 mm, 3.8 mm, 4 mm, 4.8 mm, 5 mm, 5.3 mm, 6 mm, 6.7 mm, 7.3 mm, 8 mm, 10 mm, and 12 mm
– **Catalog category:** Spoons and Curettes (FK)
– **Catalog numbers:** FK611R, FK612R, FK613R, FK614R, FK615R, FK616R, FK617R, MB872R, MB873R, MB874R, MB875R, MB876R, MB877R, MB878R, MB879R, MB880R
– **Configurations:** 16
– **Family ID:** FAM-000161
– **Source:** Aesculap Surgical Instrument Catalog, pp. 1466–1473

## Specification Coverage

The source catalog prints overall length, working-end diameter, curvature, edge, and shaft characteristic for this listing. It does not print size code, material, working angle, and tip form; these values are omitted here rather than estimated, and can be confirmed on inquiry. This listing reproduces only what the manufacturer’s catalog states. No material, certification, performance or clinical claim is added.

## Applications

The printed instrument designation identifies this item for bone procedures. This statement rests solely on the designation printed in the source catalog. The catalog does not publish indications, clinical protocols or procedure lists, and none are implied here. Confirm suitability for any specific procedure with your clinical team and against the manufacturer’s current instructions for use.

## Ordering Information

Bruns Bone Curette is supplied on a request-for-quote basis; the catalog publishes no price. Quote the catalog number for the configuration required. This family covers FK611R, FK612R, FK613R, FK614R, FK615R, FK616R, FK617R, MB872R, MB873R, MB874R, MB875R, and MB876R among others. Refer to the individual configurations listed above for the exact printed specification of each. Send an inquiry to confirm current availability, packaging and lead time, or to request a formal quotation. Contact us for procurement documentation, including catalog references for tender submissions.

## Source and Traceability

All specifications above are reproduced from the Aesculap Surgical Instrument Catalog, pages 1466–1473, Spoons and Curettes section. Registry reference REG-000360; family FAM-000161. Values not printed in the source are omitted rather than estimated. For reference, the printed specification block for FK611R reads: · BRUNS · 6 1/2“, 165.00 mm · straight, gerade · sharp, scharf · rigid, starr