Electrode Handle

## Product Overview

Electrode Handle is a electrode handle listed in the HF Instruments range of the Aesculap Surgical Instrument Catalog, pages 1421–1422. The source catalog is bilingual and prints the designation as Electrode Handle in English and Elektrodenhandgriff in German, so either term can be used when matching this item against an existing inventory or tender list. This entry represents the complete catalogued family of 4 configurations rather than a single item, so the specifications below describe the full printed range. Each configuration carries its own catalog number and is quoted separately. It is classified in the catalog under Surgical Instruments > HF Instruments > Electrode Handle.

## Design Characteristics

The following characteristics are printed for every configuration in this listing: diameter 4 mm, straight, monopolar, and cable length 4.5 m. The printed working-end diameter is 4 mm. The working portion is printed as straight, which is the geometry the catalog specifies for this reference. The catalog prints the energy mode as monopolar, which determines the generator connection and cable configuration required. The catalog prints these descriptors bilingually: straight (gerade).

## Configuration Options

The family is catalogued in 4 configurations. The source catalog does not print an attribute that distinguishes every configuration in this family, so each is identified by its printed catalog number. The printed specification for each is reproduced below exactly as it appears in the source, with no value inferred.

– **GN230** — straight; monopolar; cable length 4.5 m; diameter 4 mm
– **GN232** — straight; monopolar; cable length 4.5 m; diameter 4 mm
– **GN236** — straight; monopolar; cable length 4.5 m; diameter 4 mm
– **GN261** — straight; monopolar; cable length 4.5 m; diameter 4 mm

Each configuration above is a separately catalogued item and can be quoted individually or as a set. Where two configurations carry identical printed specifications, the source catalog distinguishes them by catalog number only.

## Technical Specifications

– **Instrument type:** Electrode Handle
– **Diameter:** 4 mm
– **Curvature:** straight
– **Energy mode:** monopolar
– **Cable length:** 4.5 m
– **Catalog category:** HF Instruments (GK)
– **Catalog numbers:** GN230, GN232, GN236, GN261
– **Configurations:** 4
– **Family ID:** FAM-000091
– **Source:** Aesculap Surgical Instrument Catalog, pp. 1421–1422

## Specification Coverage

The source catalog prints working-end diameter and curvature for this listing. It does not print overall length, edge, size code, material, working angle, shaft characteristic, and tip form; these values are omitted here rather than estimated, and can be confirmed on inquiry. This listing reproduces only what the manufacturer’s catalog states. No material, certification, performance or clinical claim is added.

## Ordering Information

Electrode Handle is supplied on a request-for-quote basis; the catalog publishes no price. Quote the catalog number for the configuration required. This family covers GN230, GN232, GN236, and GN261. Refer to the individual configurations listed above for the exact printed specification of each. Send an inquiry to confirm current availability, packaging and lead time, or to request a formal quotation. Contact us for procurement documentation, including catalog references for tender submissions.

## Source and Traceability

All specifications above are reproduced from the Aesculap Surgical Instrument Catalog, pages 1421–1422, HF Instruments section. Registry reference REG-000160; family FAM-000091. Values not printed in the source are omitted rather than estimated. For reference, the printed specification block for GN230 reads: · 4.50 m · straight, gerade · monopolar · 4.00 mm