Graduated Surgical Ruler (mm/inch)

Product Overview

This is a graduated surgical ruler used for linear measurement in the operating environment. Each ruler in the family carries a dual scale marked in both millimeters and inches, allowing a measured value to be read directly in either unit. The family is supplied as a single instrument type in three working lengths, so a department can standardize on one rule design while selecting the length that suits a given task.

A ruler is read by aligning its zero mark with one end of the span to be measured and reading the value at the other end. Because this family is graduated in both millimeters and inches, the same physical rule yields a reading in either unit without a separate conversion step, which is useful where measurements must be recorded in one unit but taken in the other.

Design and Configuration

The defining characteristic of the family is the dual millimeter-and-inch graduation, which is identical across every length. The three members differ only by overall length: 150 mm (6″), 300 mm (11 3/4″) and 500 mm (19 3/4″). The shorter 150 mm rule suits confined fields and bench measurement, the 300 mm rule covers general intra-operative measurement, and the 500 mm rule extends to longer spans. Because graduation and instrument type are shared, the choice between configurations is driven purely by required reach.

This product is offered as a family of related configurations. The available configurations are:

• Graduated Surgical Ruler, mm/inch, 150 mm (6″) (article AA804R): 150.00 mm (6″).
• Graduated Surgical Ruler, mm/inch, 300 mm (11 3/4″) (article AA805R): 300.00 mm (11 3/4″).
• Graduated Surgical Ruler, mm/inch, 500 mm (19 3/4″) (article AA806R): 500.00 mm (19 3/4″).

All configurations share the same instrument type and pattern identity and are listed together as a single family so the correct option can be selected without changing the instrument design. Refer to the individual variation for the exact specification when requesting a quote.

Selection Guidance

Selection within the family is straightforward because every member shares the same instrument type; only the distinguishing attribute changes between configurations. A department can therefore standardize on a single design and stock or order the specific option that matches the task at hand, rather than treating each option as a different instrument.

Technical Specifications

The following specifications are taken directly from the source catalog. Fields the catalog does not state are omitted rather than estimated:

• Instrument Type: Surgical Ruler.
• Graduation: Millimeters and inches.
• Available Lengths: 150 mm (6″), 300 mm (11 3/4″), 500 mm (19 3/4″).
• Configurations: 3.
• Family ID: FAM-000001.

In terms of specification scope, the source catalog states the following for this item: instrument type, graduation, available lengths, configurations. It does not state material, surface finish, so those are not listed above; we present only the attributes the catalog publishes and confirm any further detail on request. Keeping the record limited to published attributes preserves traceability between the storefront entry and the original catalog.

Applications

The following uses follow directly from the instrument’s type and the catalog specification:

• Linear measurement of anatomy, specimens or materials during surgical procedures.
• Reading dimensions directly in millimeters or inches without conversion.

Identification and Traceability

This product is identified by Aesculap article numbers AA804R, AA805R, AA806R; the internal family identifier FAM-000001. Every record traces back to the catalog page on which the item appears, so the published article number remains the authoritative ordering reference.

Specification Scope and Material

Material and surface finish are not stated in the source catalog for this item and are therefore not listed; these details can be confirmed on request and are not estimated here.

Catalog Reference

For reference, this product is catalogued within the Instruments for Measuring section of the source surgical instrument catalog. The published article number is treated as the authoritative ordering reference, and the storefront presentation is kept brand-neutral and factual.

Ordering Information

This storefront operates as a business-to-business inquiry platform for hospitals, surgical centers, procurement teams, distributors and dealers. Native prices are not displayed. Because the product is offered in several configurations, the required configuration should be chosen first, after which a quote can be requested for that specific article number. A request-a-quote or send-inquiry action returns current pricing, lead time and availability, and our team responds with the details needed to complete an order.