Luer-Koerte Gallstone Scoop, Uterine Curette

## Product Overview

Luer-Koerte Gallstone Scoop, Uterine Curette is a gallstone scoop, uterine curette listed in the Spoons and Curettes range of the Aesculap Surgical Instrument Catalog, page 1439. The catalog identifies the instrument under the LUER-KOERTE pattern, which is the designation procurement teams and distributors use to identify this instrument family across suppliers. This entry represents the complete catalogued family of 6 configurations rather than a single item, so the specifications below describe the full printed range. Each configuration carries its own catalog number and is quoted separately. The family is printed in the catalog under the range EB169R-EB174R. It is classified in the catalog under Surgical Instruments > Spoons and Curettes > Gallstone Scoop, Uterine Curette.

## Design Characteristics

The following characteristics are printed for every configuration in this listing: length 325 mm, straight, blunt, malleable, and length (imperial) 12 3/4″. Overall length is printed as 325 mm (12 3/4″ imperial). The working portion is printed as straight, which is the geometry the catalog specifies for this reference. The catalog prints the working edge as blunt. The shaft is printed as malleable. The catalog prints these descriptors bilingually: straight (gerade), blunt (stumpf), and malleable (biegbar). Characteristics that differ across the family are set out under Configuration Options below.

## Configuration Options

The family is catalogued in 6 configurations. Configurations are distinguished by diameter. Printed diameter options are 3.4 mm, 4.3 mm, 5.5 mm, 6.7 mm, 8 mm, and 11 mm. Any combination not listed below is not printed in the source catalog and is therefore not offered as a catalogued configuration.

– **EB169R** — straight; blunt; malleable; size #00; length 325 mm; diameter 3.4 mm
– **EB170R** — straight; blunt; malleable; size #0; length 325 mm; diameter 4.3 mm
– **EB171R** — straight; blunt; malleable; size #1; length 325 mm; diameter 5.5 mm
– **EB172R** — straight; blunt; malleable; size #2; length 325 mm; diameter 6.7 mm
– **EB173R** — straight; blunt; malleable; size #3; length 325 mm; diameter 8 mm
– **EB174R** — straight; blunt; malleable; size #4; length 325 mm; diameter 11 mm

Each configuration above is a separately catalogued item and can be quoted individually or as a set. Where two configurations carry identical printed specifications, the source catalog distinguishes them by catalog number only.

## Technical Specifications

– **Instrument type:** Gallstone Scoop, Uterine Curette
– **Pattern:** LUER-KOERTE
– **Length:** 325 mm
– **Curvature:** straight
– **Edge:** blunt
– **Shaft characteristic:** malleable
– **Length (imperial):** 12 3/4″
– **Diameter options:** 3.4 mm, 4.3 mm, 5.5 mm, 6.7 mm, 8 mm, and 11 mm
– **Catalog category:** Spoons and Curettes (FK)
– **Catalog numbers:** EB169R, EB170R, EB171R, EB172R, EB173R, EB174R
– **Configurations:** 6
– **Family ID:** FAM-000114
– **Source:** Aesculap Surgical Instrument Catalog, p. 1439

## Specification Coverage

The source catalog prints overall length, working-end diameter, curvature, edge, and shaft characteristic for this listing. It does not print size code, material, working angle, and tip form; these values are omitted here rather than estimated, and can be confirmed on inquiry. This listing reproduces only what the manufacturer’s catalog states. No material, certification, performance or clinical claim is added.

## Applications

The printed instrument designation identifies this item for uterine procedures and gallstone procedures. This statement rests solely on the designation printed in the source catalog. The catalog does not publish indications, clinical protocols or procedure lists, and none are implied here. Confirm suitability for any specific procedure with your clinical team and against the manufacturer’s current instructions for use.

## Ordering Information

Luer-Koerte Gallstone Scoop, Uterine Curette is supplied on a request-for-quote basis; the catalog publishes no price. Quote the catalog number for the configuration required. This family covers EB169R, EB170R, EB171R, EB172R, EB173R, and EB174R. Refer to the individual configurations listed above for the exact printed specification of each. Send an inquiry to confirm current availability, packaging and lead time, or to request a formal quotation. Contact us for procurement documentation, including catalog references for tender submissions.

## Source and Traceability

All specifications above are reproduced from the Aesculap Surgical Instrument Catalog, page 1439, Spoons and Curettes section. Registry reference REG-000200; family FAM-000114. Values not printed in the source are omitted rather than estimated. For reference, the printed specification block for EB169R reads: · LUER-KOERTE · 12 3/4“, 325.00 mm · straight, gerade · blunt, stumpf · malleable, biegbar