Payr Guiding Probe

## Product Overview

Payr Guiding Probe is a guiding probe listed in the Probes range of the Aesculap Surgical Instrument Catalog, pages 1379–1380. The catalog identifies the instrument under the PAYR pattern, which is the designation procurement teams and distributors use to identify this instrument family across suppliers. The source catalog is bilingual and prints the designation as Guiding Probe in English and Führungshohlsonde in German, so either term can be used when matching this item against an existing inventory or tender list. This entry represents the complete catalogued family of 2 configurations rather than a single item, so the specifications below describe the full printed range. Each configuration carries its own catalog number and is quoted separately. It is classified in the catalog under Surgical Instruments > Probes > Guiding Probe.

## Design Characteristics

The following characteristics are printed for every configuration in this listing: diameter 5 mm and curved. The printed working-end diameter is 5 mm. The working portion is printed as curved, which is the geometry the catalog specifies for this reference. The catalog prints these descriptors bilingually: curved (gebogen). Characteristics that differ across the family are set out under Configuration Options below.

## Configuration Options

The family is catalogued in 2 configurations. Configurations are distinguished by length. Printed length options are 195 mm and 225 mm. Any combination not listed below is not printed in the source catalog and is therefore not offered as a catalogued configuration.

– **BM920R** — curved; length 195 mm; diameter 5 mm
– **BM922R** — curved; length 225 mm; diameter 5 mm

Each configuration above is a separately catalogued item and can be quoted individually or as a set. Where two configurations carry identical printed specifications, the source catalog distinguishes them by catalog number only.

## Technical Specifications

– **Instrument type:** Guiding Probe
– **Pattern:** PAYR
– **Diameter:** 5 mm
– **Curvature:** curved
– **Length options:** 195 mm and 225 mm
– **Catalog category:** Probes (BN)
– **Catalog numbers:** BM920R, BM922R
– **Configurations:** 2
– **Family ID:** FAM-000007
– **Source:** Aesculap Surgical Instrument Catalog, pp. 1379–1380

## Specification Coverage

The source catalog prints overall length, working-end diameter, and curvature for this listing. It does not print edge, size code, material, working angle, shaft characteristic, and tip form; these values are omitted here rather than estimated, and can be confirmed on inquiry. This listing reproduces only what the manufacturer’s catalog states. No material, certification, performance or clinical claim is added.

## Ordering Information

Payr Guiding Probe is supplied on a request-for-quote basis; the catalog publishes no price. Quote the catalog number for the configuration required. This family covers BM920R and BM922R. Refer to the individual configurations listed above for the exact printed specification of each. Send an inquiry to confirm current availability, packaging and lead time, or to request a formal quotation. Contact us for procurement documentation, including catalog references for tender submissions.

## Source and Traceability

All specifications above are reproduced from the Aesculap Surgical Instrument Catalog, pages 1379–1380, Probes section. Registry reference REG-000010; family FAM-000007. Values not printed in the source are omitted rather than estimated. For reference, the printed specification block for BM920R reads: · PAYR · 7 3/4“, 195.00 mm · curved, gebogen · 5.00 mm