Plester Suction Cannula

Overview

The Plester Suction Cannula is a Plester suction cannula used to aspirate blood, fluids and secretions from the operative field. It carries the Plester pattern, a named instrument pattern within the suction instruments range. This listing represents the complete Plester Suction Cannula product family, offered as a configurable range of variations that share a common design and differ in defined, printed characteristics.

It is classified under Suction Instruments › Suction Cannula and is intended for use by trained surgical and clinical personnel. All specifications below are taken directly from the manufacturer catalog; characteristics that are not stated in the catalog are omitted rather than assumed.

Instrument Class and Clinical Role

Suction cannulae are connected to a vacuum source and used to aspirate blood, irrigation fluid and secretions from the operative field, maintaining a clear and dry field so that anatomy remains visible throughout dissection and closure. The geometry of the working tip and the internal bore govern how fluid is drawn from the field and how readily the tip can be positioned in confined spaces. Instruments of this class are selected by working length, diameter and tip form.

Pattern and Identification

This instrument is supplied in the Plester pattern. Within a surgical inventory, the pattern name together with the source catalogue reference number uniquely identifies the item, which supports accurate reordering and standardisation across a department. Every variation in this family is listed with its own catalog reference so that a specific configuration can be ordered without ambiguity.

Design and Configuration

The family is supplied in 8 distinct configurations. Because several printed characteristics vary together across the range, each variation is identified by its full printed specification together with its catalog reference number, so that the intended item is selected without ambiguity. All items in this listing share a angled profile.

Configuration Options

The following configurations make up this family: 55 mm / 2.5 mm; 195 mm / 1.5 mm; 195 mm / 2 mm; 195 mm / 2.5 mm; 195 mm / 3 mm; 55 mm / 1.5 mm; 55 mm / 2 mm; 55 mm / 2.5 mm. Each is a distinct catalog item; refer to the individual variations for the exact printed specifications.

Technical Specifications

The following specifications are recorded for this listing. Pattern / Eponym: Plester. Instrument Type: Suction Cannula. Category: Suction Instruments. Subcategory: Suction Cannula. Curvature: angled. Available Configurations: 8. Variation Count: 8. Family ID: FAM-000054.

Applications

Consistent with its design as a Plester suction cannula used to aspirate blood, fluids and secretions from the operative field, the Plester Suction Cannula is applied in surgical procedures. The scope described here is limited to the definitional function of the instrument class; the specific procedures, techniques and patient selection for which the instrument is appropriate are a matter of clinical judgement and institutional protocol and should be determined by the operating clinician.

No performance, outcome or suitability claims are made beyond the instrument’s stated design.

Material, Finish and Reprocessing

The manufacturer catalog data underlying this listing does not state the material, surface finish or reprocessing parameters for the item, and these are therefore not asserted here. Confirm material specifications, compatibility and validated reprocessing instructions with the supplier or manufacturer documentation before purchase or use.

Procurement and Standardisation

Because every item is identified by a stablecatalogue reference number, this listing supports consistent reordering and inventory standardisation across an operating department. Recording the pattern name together with the reference number allows procurement teams to match replacement stock to instruments already in service and to compare like-for-like items between suppliers. Availability, minimum order requirements and lead times are confirmed on inquiry.

Ordering and Procurement

This product is available in multiple configurations; refer to the individual variations for exact specifications and catalog reference numbers. Pricing is not published on this platform, which operates on an inquiry (request-a-quote) basis. To proceed, request a quote or send an inquiry and our team will confirm current availability, the exact configuration and lead times. This listing is intended for hospitals, surgical centers, procurement teams, distributors and dealers.

Frequently Asked Questions

What are the specifications of the Plester Suction Cannula?

Configuration: 195 mm / 1.5 mm, 195 mm / 2 mm, 195 mm / 2.5 mm, 195 mm / 3 mm, 55 mm / 1.5 mm, 55 mm / 2 mm, 55 mm / 2.5 mm; Curvature: Angled.

How is the Plester Suction Cannula identified for ordering?

It is listed under SKU RG-003435. Individual configurations carry their own manufacturer article reference.

How do I request pricing for the Plester Suction Cannula?

Pricing is quoted per enquiry. Submit a request through the product page and Rahmet Group will respond with pricing, lead time and packaging.