Probe, Salival Probe

## Product Overview

Probe, Salival Probe is a probe, salival probe listed in the Probes range of the Aesculap Surgical Instrument Catalog, page 1391. The source catalog is bilingual and prints the designation as Probe, Salival Probe in English and Sonde, Speichelgangsonde in German, so either term can be used when matching this item against an existing inventory or tender list. This entry represents a single catalogued configuration, catalog number OM488, and the specifications below are the values printed for that reference. It is classified in the catalog under Surgical Instruments > Probes > Probe, Salival Probe.

## Design Characteristics

The following characteristics are printed for every configuration in this listing: length 160 mm, diameter 1.4 mm, straight, bulb-headed tip, and length (imperial) 6 1/4″. Overall length is printed as 160 mm (6 1/4″ imperial). The printed working-end diameter is 1.4 mm. The working portion is printed as straight, which is the geometry the catalog specifies for this reference. The tip is printed as bulb-headed tip. The catalog prints these descriptors bilingually: straight (gerade) and bulb-headed tip (Knopfspitze).

## Configuration Options

This instrument is catalogued as a single configuration under catalog number OM488. The source catalog prints no alternative lengths, curvatures, diameters or sizes under this entry. Related configurations, where the catalog lists them, appear as separate entries in the Probes range and are registered here as separate products. The printed specification for this reference is reproduced in full under Technical Specifications below.

## Technical Specifications

– **Instrument type:** Probe, Salival Probe
– **Length:** 160 mm
– **Diameter:** 1.4 mm
– **Curvature:** straight
– **Tip:** bulb-headed tip
– **Length (imperial):** 6 1/4″
– **Catalog category:** Probes (BN)
– **Catalog numbers:** OM488
– **Configurations:** 1
– **Family ID:** FAM-000032
– **Source:** Aesculap Surgical Instrument Catalog, p. 1391

## Specification Coverage

The source catalog prints overall length, working-end diameter, curvature, and tip form for this listing. It does not print edge, size code, material, working angle, and shaft characteristic; these values are omitted here rather than estimated, and can be confirmed on inquiry. This listing reproduces only what the manufacturer’s catalog states. No material, certification, performance or clinical claim is added.

## Ordering Information

Probe, Salival Probe is supplied on a request-for-quote basis; the catalog publishes no price. Quote catalog number OM488 when submitting an inquiry. Send an inquiry to confirm current availability, packaging and lead time, or to request a formal quotation. Contact us for procurement documentation, including catalog references for tender submissions.

## Source and Traceability

All specifications above are reproduced from the Aesculap Surgical Instrument Catalog, page 1391, Probes section. Registry reference REG-000056; family FAM-000032. Values not printed in the source are omitted rather than estimated. For reference, the printed specification block for OM488 reads: · 6 1/4“, 160.00 mm · straight, gerade · bulb-headed tip, Knopfspitze · 1.40 mm