Vascular Dilator

Overview

The Vascular Dilator is a vascular dilator used to dilate the vessel lumen during vascular and microvascular procedures. This listing represents the complete Vascular Dilator product family, offered as a configurable range of variations that share a common design and differ in defined, printed characteristics. It is classified under Dilators › Vascular Dilator and is intended for use by trained surgical and clinical personnel.

All specifications below are taken directly from the manufacturer catalog; characteristics that are not stated in the catalog are omitted rather than assumed.

Instrument Class and Clinical Role

Vascular dilators are used to gently open the lumen of a blood vessel during vascular and microvascular procedures, for example to prepare a vessel end prior to anastomosis. The instrument is introduced into the lumen to dilate it without injuring the vessel wall. Instruments of this class are defined by very fine tip diameters and by their length and tip geometry.

Design and Configuration

Available diameter options are 0.5 mm, 1 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 7 mm, and 9 mm. The range of diameters corresponds to the degree of dilation or the calibre required, allowing the instrument to be matched to the anatomy. All items in this listing share a total length of 190 mm and a yes construction.

Configuration Options

This is a configurable (variable) product. A specific item is selected by choosing from the available diameter options listed above; the family comprises 12 variations in total. The individual configurations are: Vascular Dilator, Ø 0.5 mm; Vascular Dilator, Ø 1 mm; Vascular Dilator, Ø 1.5 mm; Vascular Dilator, Ø 2 mm; Vascular Dilator, Ø 2.5 mm; Vascular Dilator, Ø 3 mm; Vascular Dilator, Ø 3.5 mm; Vascular Dilator, Ø 4 mm; Vascular Dilator, Ø 4.5 mm; Vascular Dilator, Ø 5 mm; Vascular Dilator, Ø 7 mm; Vascular Dilator, Ø 9 mm.

Each configuration maps to a uniquecatalogue reference so that the exact item can be ordered without ambiguity.

Technical Specifications

The following specifications are recorded for this listing. Instrument Type: Vascular Dilator. Category: Dilators. Subcategory: Vascular Dilator. Length: 190 mm. Malleable: Yes. Available Diameter: 0.5 mm, 1 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 7 mm, and 9 mm. Variation Count: 12. Family ID: FAM-000095.

Applications

Consistent with its design as a vascular dilator used to dilate the vessel lumen during vascular and microvascular procedures, the Vascular Dilator is applied in vascular and microvascular procedures. The scope described here is limited to the definitional function of the instrument class; the specific procedures, techniques and patient selection for which the instrument is appropriate are a matter of clinical judgement and institutional protocol and should be determined by the operating clinician.

No performance, outcome or suitability claims are made beyond the instrument’s stated design.

Material, Finish and Reprocessing

The manufacturer catalog data underlying this listing does not state the material, surface finish or reprocessing parameters for the item, and these are therefore not asserted here. Confirm material specifications, compatibility and validated reprocessing instructions with the supplier or manufacturer documentation before purchase or use.

Procurement and Standardisation

Because every item is identified by a stablecatalogue reference number, this listing supports consistent reordering and inventory standardisation across an operating department. Recording the pattern name together with the reference number allows procurement teams to match replacement stock to instruments already in service and to compare like-for-like items between suppliers. Availability, minimum order requirements and lead times are confirmed on inquiry.

Ordering and Procurement

This product is available in multiple configurations; refer to the individual variations for exact specifications and catalog reference numbers. Pricing is not published on this platform, which operates on an inquiry (request-a-quote) basis. To proceed, request a quote or send an inquiry and our team will confirm current availability, the exact configuration and lead times. This listing is intended for hospitals, surgical centers, procurement teams, distributors and dealers.

Frequently Asked Questions

What are the specifications of the Vascular Dilator?

Diameter: 0.5 mm, 1 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 7 mm, 9 mm; Length: 190 mm; Malleable: Yes.

How is the Vascular Dilator identified for ordering?

It is listed under SKU RG-003449. Individual configurations carry their own manufacturer article reference.

How do I request pricing for the Vascular Dilator?

Pricing is quoted per enquiry. Submit a request through the product page and Rahmet Group will respond with pricing, lead time and packaging.